MG XQE 100 370

Blaupunkt CD / Tuner as fitted to a wide range of MG Vehicles.

Please note that code entry is only possible when the display shows "CODE - - - -". If the unit is codelocked, leave it switched on for up to two hours and a further attempt at code entry should be possible. We are able to decode this radio by E-Mail if you follow the simple instructions shown below.

To remove the Radio, you will need to open the two small flaps either side of the fascia, and this will reveal two allen keyed screws that are holdng the unit in. Using a 2.5mm Allen Key or a Torx T10, unscrew the bolts couter clockwise until a small resistance is felt. The bolts will not come out, but are moving a sliding bar at the side of the radio. Once a slight resistance has been felt, the radio can be withdrawn. The leads are often very fiddly to remove and require the plastic housing at the rear plug to be slid in an upwards direction to unlock the clip holding the plug in. This is often very tight.

Removal Tools Required : Allen Key 2.5mm or Torx T10

If you intend replacing this Stereo with an Aftermarket one, you may need the following:

PC2-05-4 BMW to ISO Adaptor Lead
PC5-27 ISO to DIN Aerial Adaptor Lead

Accessories Available for this Radio:

PC3-211 BMW Power Cord to Female ISO Socket