Mazda CR-YM0270KA
Matsushita

Mazda CR-YM0270KA

£43.20
Code Entry as Follows:

Switch ON the Ignition (No need to start car)
Switch Radio On - Display Shows
" CODE " Flashing
Press And Hold " DISP/Auto-M " And Preset " 6 "
The Display Will Show " - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press And Hold " DISP/Auto-M " And Preset " 6 "
The Display Will Slowly Flash "CODE"
And the Radio will then Turn On

Radio Code & Decoding Service

Mazda CR-YM0270KA
4M71-18K876-AC
Matsushita

As originally fitted to the :

Mazda 2
Mazda Demio













Please note that code entry is only possible when "CODE" is shown are flashing in the display. If the unit is codelocked it will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, or the display shows "ERR" then all of your code entry attempts may have been used up, and the unit will need to be sent to us to be decoded and reset.

If you have lost your radio code, we can decode and reset this radio, but you will need to send the unit to our workshop for this work to be carried out. Approx turnaround time is 48 hours from receipt to dispatch.

Removal of the radio is fairly straightforward. Please consult your service manual if you are unsure how to go about this.

Please note that when sending in the radio, we will also need you to send in the fascia control panel that contains the radio operating buttons.

algo=
boo=1
status=0
mfr_status=1
IDS=4M71-18K876-AC