Kenwood KDC-W6027

Radio Code & Decoding Service

Kenwood KDC-W6027







If the display continually shows "WAIT" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, then all of your code entry attempts may have been used up, and the unit will need to be sent to us to be decoded and reset.

If you have lost your radio code, we can decode and reset this radio, but you will need to send the unit to our workshop for this work to be carried out. Approx turnaround time is 48 hours from receipt to dispatch.

At present, we have very little other information on our database regarding this stereo. We would gratefully welcome any extracts that you could send us from either the instruction or installation manuals so that we may update our records and help others with any technical assistance.

Removal of the radio is fairly straightforward. To remove the Radio, you will first need to remove the outer trim, this is simply clicked in place, but take care not to pull too hard in case the plastic lugs are damaged. Insert the removal keys until a click is felt down the sides and then withdraw the radio. The leads at the rear can then be unplugged.