Audi Navigation Plus

Radio Code & Decoding Service

Audi Navigation Plus
8D0 035 192 G
Blaupunkt 7 612 001 003

As originally fitted to :

Audi





Please note that code entry is only possible with the ignition switched on, and in the order shown. If the display continually shows "SAFE" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, then all of your code entry attempts may have been used up, and the unit will need to be sent to us to be decoded and reset.

If you have lost your radio code, we can decode and reset this radio, but you will need to send the unit to our workshop for this work to be carried out. Approx turnaround time is 48 hours from receipt to dispatch.

Removal of the radio is fairly straightforward. The removal tools (2 sets required) are inserted into the four flat horizontal slots at the top and bottom edges of the fascia until a click is felt. The radio can then be withdrawn and the leads unplugged.

Error Message: SAFE PIN NOT CONNECTED:

We get a number of phone calls from people who have retro fitted these to other vehicles and have an error message of SAFE PIN NOT CONNECTED after the Code has been entered. This is usually an installation fault and in virtually all cases it is because the SAFE PIN has not actually been connected. Please consult your installation guide for further information and ensure that the unit is installed correctly.