Porsche CD-10

Radio Code & Decoding Service

Porsche CD-10
Alpine

As originally fitted to :

Porsche


If the unit is codelocked it will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, or the display shows "OFF", then all of your code entry attempts may have been used up, and the unit will need to be sent to us to be decoded and reset.

If you have lost your radio code, we can decode and reset this radio, but you will need to send the unit to our workshop for this work to be carried out. Approx turnaround time is 48 hours from receipt to dispatch.

To remove the Radio, take off the outer trim panel and look down the sides of the radio where this trim sits. At either side will be a small metal horizontal bar, about 3mm in diameter and about 5mm long. These bars are sometimes sprung loaded, and move upwards around 3mm. Each bar must be raised about half the amount of its travel to release the catch behind it. It is a bit of a fiddle, as both sides must be raised at the same time to release as well as easing the unit gently forwards. The leads can then be unplugged.