Alpine 7982R

Radio Code & Decoding Service

Alpine 7982R






Please note that code entry is only possible when "CODE" is shown in the display. If the display continually shows " E - - - " then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, then all of your code entry attempts may have been used up, and the unit will need to be sent to us to be decoded and reset.

If you have lost your radio code, we can decode and reset this radio, but you will need to send the unit to our workshop for this work to be carried out. Approx turnaround time is 48 hours from receipt to dispatch.

To remove the Radio, take off the detachable fascia and look inside the edges of the recessed area where the fascia sits. At either side will be a small round disc, about 3mm in diameter with a small indentation in it. These discs are sprung loaded, and move upwards around 3mm. Each disc must be raised about half the amount of its travel to release the catch behind it. It is a bit of a fiddle, as both dics must be raised at the same time to release as well as easing the unit gently forwards. The leads can then be unplugged.

If sending the unit to us, please be sure to include the small white power cord and lead.