Code Entry as Follows:

Switch On Ignition (No Need To Start Engine)
Turn Off Stereo
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps

Code Entry as Follows:

Switch On Ignition (No Need To Start Engine)
Turn Off Stereo
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps

Code Entry as Follows:

Switch On Ignition (No Need To Start Engine)
Turn Off Stereo
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps

Code Entry as Follows:

Switch On Ignition (No Need To Start Engine)
Turn Off Stereo
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps

Code Entry as Follows:

Switch On Ignition (No Need To Start Engine)
Turn Off Stereo
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps

Code Entry as Follows:

Switch Radio On - Display Shows
" ID CHECK " then " LOCK "
" 0000 "
(This may take up to 10 Seconds - be patient)
Rotate " PRESET " Knob to Select 1st Digit
Press " PRESET " Knob to Enter
Rotate " PRESET " Knob to Select 2nd Digit
Press " PRESET " Knob to Enter
Rotate " PRESET " Knob to Select 3rd Digit
Press " PRESET " Knob to Enter
Rotate " PRESET " Knob to Select 4th Digit
If the correct code number is now shown
Press And Hold " PRESET " Knob To Enter

Code Entry as Follows:

Switch Radio On - Display Shows
" ID CHECK " then " LOCK "
" 0000 "
(This may take up to 10 Seconds - be patient)
Rotate " PRESET " Knob to Select 1st Digit
Press " PRESET " Knob to Enter
Rotate " PRESET " Knob to Select 2nd Digit
Press " PRESET " Knob to Enter
Rotate " PRESET " Knob to Select 3rd Digit
Press " PRESET " Knob to Enter
Rotate " PRESET " Knob to Select 4th Digit
If the correct code number is now shown
Press And Hold " PRESET " Knob To Enter

Code Entry as Follows:

Switch On Ignition (No Need To Start Engine)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Tuning Up Button " ^ " To Enter

Code Entry as Follows:

Switch On Ignition (No Need To Start Engine)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Tuning Up Button " ^ " To Enter

Code Entry as Follows:

Switch On Ignition (No Need To Start Engine)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Tuning Up Button " ^ " To Enter

Code Entry as Follows:

Switch On Ignition (No Need To Start Engine)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Tuning Up Button " ^ " To Enter

Code Entry as Follows:

Switch On Ignition (No Need To Start Engine)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Tuning Up Button " ^ " To Enter

Code Entry as Follows:

Switch ON the Ignition (No need to start car)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press SEEK UP Button " ^ " To Enter

Code Entry as Follows:

Switch ON the Ignition (No need to start car)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Preset " UP > " To Enter

Code Entry as Follows:

Switch ON the Ignition (No need to start car)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Preset " UP > " To Enter

Code Entry as Follows:

Switch ON the Ignition (No need to start car)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Preset " UP > " To Enter

Code Entry as Follows:

Switch ON the Ignition (No need to start car)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press RH Tuning Button " > " To Enter

Code Entry as Follows:

Switch ON the Ignition (No need to start car)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press RH Tuning Button " > " To Enter

Code Entry as Follows:

Switch ON the Ignition (No need to start car)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press RH Tuning Button " > " To Enter

Code Entry as Follows:

Switch ON the Ignition (No need to start car)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press RH Tuning Button " > " To Enter

Code Entry as Follows:

Switch ON the Ignition (No need to start car)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press RH Tuning Button " > " To Enter